tencent cloud

Overview

EdgeOne has been connected to Terraform to allow for quick configuration. This document describes how to use Terraform to configure site acceleration. For more information, see Tencent Cloud EdgeOne.

Prerequisites

1. You have installed and configured Terraform as instructed in Installing and Configuring Terraform.
2. You have connected to the site through Terraform as instructed in Creating Site Through Terraform.

Directions

1. Modify the Terraform configuration file and add the resource definitions of site acceleration configuration.
   You can view the parameter definitions of the site acceleration configuration on the Terraform Provider documentation page. Below is the tencent_teo.tf sample configuration file.

terraform {
required_providers {
  tencentcloud = {
    source  = "tencentcloudstack/tencentcloud"
    version = ">= 1.78.5"
  }
}
}
provider "tencentcloud" {
secret_id  = "<your-secret-id>"
secret_key = "<your-secret-key>"
region     = "ap-guangzhou"
}
resource "tencentcloud_teo_zone" "example" {
zone_name = "example.com"
plan_type = "ent"
tags = {
  "createdBy" = "terraform"
}
}
resource "tencentcloud_teo_zone_setting" "example" {
zone_id = tencentcloud_teo_zone.example.id
# Cache rule configuration
cache {
  follow_origin {
    switch = "on" # Follow the origin server
  }
}
# Cache key configuration
cache_key {
  full_url_cache = "off" # Do not enable full path cache
  ignore_case    = "on" # Ignore the case
  query_string {
    switch = "on"
    action = "includeCustom" # Only use the specified URL parameter
    value  = ["param0", "param1"]
  }
}
# HTTPS acceleration configuration of the domain name
https {
  ocsp_stapling = "on" # OCSP configuration enabled
  tls_version   = ["TLSv1.2", "TLSv1.3"] # Supported TLS protocol versions
}
# Smart compression configuration
compression {
  switch     = "on"
  algorithms = ["brotli", "gzip"]
}
# Region of the client IP during origin-pull
client_ip_header {
  switch      = "on"
  header_name = "EO-Client-IPCountry"
}
}

2. Run the terraform plan command to preview the configuration and verify whether it is correct.

PS tf-doc> terraform.exe plan
tencentcloud_teo_zone.example: Refreshing state... [id=zone-2ag9gej58j36]
Terraform used the selected providers to generate the following execution plan. Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
# tencentcloud_teo_zone_setting.example will be created
+ resource "tencentcloud_teo_zone_setting" "example" {
    + area    = (known after apply)
    + id      = (known after apply)
    + zone_id = "zone-2ag9gej58j36"
    + cache {
        + cache {
            + cache_time           = (known after apply)
            + ignore_cache_control = (known after apply)
            + switch               = (known after apply)
          }
        + follow_origin {
            + switch = "on"
          }
        + no_cache {
            + switch = (known after apply)
          }
      }
    + cache_key {
        + full_url_cache = "off"
        + ignore_case    = "on"
        + query_string {
            + action = "includeCustom"
            + switch = "on"
            + value  = [
                + "param0",
                + "param1",
              ]
          }
      }
    + cache_prefresh {
        + percent = (known after apply)
        + switch  = (known after apply)
      }
    + client_ip_header {
        + header_name = "EO-Client-IPCountry"
        + switch      = "on"
      }
    + compression {
        + algorithms = [
            + "brotli",
            + "gzip",
          ]
        + switch     = "on"
      }
    + force_redirect {
        + redirect_status_code = (known after apply)
        + switch               = (known after apply)
      }
    + https {
        + ocsp_stapling = "on"
        + tls_version   = [
            + "TLSv1.2",
            + "TLSv1.3",
          ]
      }
    + ipv6 {
        + switch = (known after apply)
      }
    + max_age {
        + follow_origin = (known after apply)
        + max_age_time  = (known after apply)
      }
    + offline_cache {
        + switch = (known after apply)
      }
    + origin {
        + backup_origins       = (known after apply)
        + cos_private_access   = (known after apply)
        + origin_pull_protocol = (known after apply)
        + origins              = (known after apply)
      }
    + post_max_size {
        + max_size = (known after apply)
        + switch   = (known after apply)
      }
    + quic {
        + switch = (known after apply)
      }
    + smart_routing {
        + switch = (known after apply)
      }
    + upstream_http2 {
        + switch = (known after apply)
      }
    + web_socket {
        + switch  = (known after apply)
        + timeout = (known after apply)
      }
  }
Plan: 1 to add, 0 to change, 0 to destroy.
─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────── 
Note: You didn't use the -out option to save this plan, so Terraform can't guarantee to take exactly these actions if you run "terraform apply" now.

3. Run terraform apply to create the site acceleration configuration.
   After the terraform apply command is executed, Terraform will ask you to confirm the actions to be executed. After confirming that everything is correct, enter yes. Then, wait for the command to complete.

PS tf-doc> terraform.exe apply                                     
tencentcloud_teo_zone.example: Refreshing state... [id=zone-2ag9gej58j36]
Terraform used the selected providers to generate the following execution plan. Resource actions are indicated with the following symbols:
+ create
Terraform will perform the following actions:
# tencentcloud_teo_zone_setting.example will be created
+ resource "tencentcloud_teo_zone_setting" "example" {
    + area    = (known after apply)
    + id      = (known after apply)
    + zone_id = "zone-2ag9gej58j36"
    + cache {
        + cache {
            + cache_time           = (known after apply)
            + ignore_cache_control = (known after apply)
            + switch               = (known after apply)
          }
        + follow_origin {
            + switch = "on"
          }
        + no_cache {
            + switch = (known after apply)
          }
      }
    + cache_key {
        + full_url_cache = "off"
        + ignore_case    = "on"
        + query_string {
            + action = "includeCustom"
            + switch = "on"
            + value  = [
                + "param0",
                + "param1",
              ]
          }
      }
    + cache_prefresh {
        + percent = (known after apply)
        + switch  = (known after apply)
      }
    + client_ip_header {
        + header_name = "EO-Client-IPCountry"
        + switch      = "on"
      }
    + compression {
        + algorithms = [
            + "brotli",
            + "gzip",
          ]
        + switch     = "on"
      }
    + force_redirect {
        + redirect_status_code = (known after apply)
        + switch               = (known after apply)
      }
    + https {
        + ocsp_stapling = "on"
        + tls_version   = [
            + "TLSv1.2",
            + "TLSv1.3",
          ]
      }
    + ipv6 {
        + switch = (known after apply)
      }
    + max_age {
        + follow_origin = (known after apply)
        + max_age_time  = (known after apply)
      }
    + offline_cache {
        + switch = (known after apply)
      }
    + origin {
        + backup_origins       = (known after apply)
        + cos_private_access   = (known after apply)
        + origin_pull_protocol = (known after apply)
        + origins              = (known after apply)
      }
    + post_max_size {
        + max_size = (known after apply)
        + switch   = (known after apply)
      }
    + quic {
        + switch = (known after apply)
      }
    + smart_routing {
        + switch = (known after apply)
      }
    + upstream_http2 {
        + switch = (known after apply)
      }
    + web_socket {
        + switch  = (known after apply)
        + timeout = (known after apply)
      }
  }
Plan: 1 to add, 0 to change, 0 to destroy.
Do you want to perform these actions?
Terraform will perform the actions described above.
Only 'yes' will be accepted to approve.
Enter a value: yes
tencentcloud_teo_zone_setting.example: Creating...
tencentcloud_teo_zone_setting.example: Creation complete after 1s [id=zone-2ag9gej58j36]
Apply complete! Resources: 1 added, 0 changed, 0 destroyed.

4. Check the command execution result.
   You can run terraform show to check whether the site acceleration configuration takes effect or log in to the EdgeOne console for confirmation.

PS tf-doc> terraform state show tencentcloud_teo_zone_setting.example
# tencentcloud_teo_zone_setting.example:
resource "tencentcloud_teo_zone_setting" "example" {
  area    = "overseas"
  id      = "zone-2ag9gej58j36"
  zone_id = "zone-2ag9gej58j36"
  cache {
      follow_origin {
          switch = "on"
      }
      no_cache {
          switch = "off"
      }
  }
  cache_key {
      full_url_cache = "off"
      ignore_case    = "on"
      query_string {
          action = "includeCustom"
          switch = "on"
          value  = [
              "param0",
              "param1",
          ]
      }
  }
  cache_prefresh {
      percent = 90
      switch  = "off"
  }
  client_ip_header {
      header_name = "EO-Client-IPCountry"
      switch      = "on"
  }
  compression {
      algorithms = [
          "brotli",
          "gzip",
      ]
      switch     = "on"
  }
  force_redirect {
      redirect_status_code = 302
      switch               = "off"
  }
  https {
      http2         = "on"
      ocsp_stapling = "on"
      tls_version   = [
          "TLSv1.2",
          "TLSv1.3",
      ]
      hsts {
          include_sub_domains = "off"
          max_age             = 0
          preload             = "off"
          switch              = "off"
      }
  }
  ipv6 {
      switch = "off"
  }
  max_age {
      follow_origin = "on"
      max_age_time  = 600
  }
  offline_cache {
      switch = "on"
  }
  origin {
      backup_origins       = []
      origin_pull_protocol = "follow"
      origins              = []
  }
  post_max_size {
      max_size = 524288000
      switch   = "on"
  }
  quic {
      switch = "off"
  }
  smart_routing {
      switch = "off"
  }
  upstream_http2 {
      switch = "off"
  }
  web_socket {
      switch  = "off"
      timeout = 30
  }
}