If you have completed Step 2. Create and Test API Service, and the test results are as expected, you can then publish this service and initiate a request from a browser to verify whether the API works properly.
blogAPIservice created in step 2.
The API service is published through the publishing action, so that the API can be accessed externally. Then, you can initiate a request in a browser to check whether the API can respond correctly.
blogAPI service, click the API name to enter the API information page and copy the default access path of the Release environment, such as
As the domain name varies by service, the domain name assigned to your service may be different from the one in this document. Please do not directly copy the address here for access.
Add the path of the created API rule after this path to form the following paths:
service-kzeed206-1251762227.ap-guangzhou.apigateway.myqcloud.com/release/article service-kzeed206-1251762227.ap-guangzhou.apigateway.myqcloud.com/release/article/1 service-kzeed206-1251762227.ap-guangzhou.apigateway.myqcloud.com/release/article/2
Copy the paths in step 2 to a browser for access and make sure that the output is the same as that during API test.
You can further modify the article number in the request and view the output to check whether the code can correctly handle an incorrect article number.
So far, you have completed the process for implementing a service through SCF and providing it through API. Subsequently, you can modify the code and add features and API rules to form a richer-featured application module.