tencent cloud

Huawei NE Series Routers
PDF 다운로드
마지막 업데이트 시간:2024-11-05 09:46:38
Huawei NE Series Routers
마지막 업데이트 시간: 2024-11-05 09:46:38
PDF 다운로드
Direct Connect connects Tencent Cloud with the user IDC with a dedicated physical line. After configuring the Direct Connect gateway and dedicated tunnel on the Tencent Cloud side, users need to configure routes on the local IDC.
Note:
This document only introduces the local routing configurations associated with Tencent Cloud Direct Connect. For other information, please see the local router documentation or consult your router provider.

Routing Configuration

Note:
It's recommended that you use the default configurations of Keepalive and holdtime for the BGP connection between the two peers. The holdtime is three times the interval at which keepalive messages are sent. The recommended holdtime value is 180s.
# Configure ports
interfaces <interface_number>
description <interface_desc>
undo shutdown
speed <interface_speed>
duplex full
undo negotiation auto
commit

# Configure virtual tunnels
interfaces <interface_number>.<subinterface_number>
description <subinterface_desc>
vlan-type dot1q <subinterface_vlanid>
ip address <subinterface_ipaddress> <subinterface_netmask>
commit

# Configure NQA detection for static routes
nqa test-instance <admin-name>< test-name>
 test-type icmp  //Default detection type
 destination-address  x.x.x.x（nexthop-address ）//Detection address
 interval seconds <value> //Detection interval
 timeout <value> //Timeout period
 probe-count <value> //Number of packets per detection
 frequency <value> //Detection frequency
 start now


# Configure static routing
# Configure global static routes
ip route-static <ip-address> <mask | mask-length> <nexthop-address> track nqa  <admin-name>< test-name>
//<ip-address>Destination IP ranges for users to access Tencent network services
such as ip route-static 172.16.0.192 255.255.255.192 10.128.152.1 track nqa user test


# Configure static routes for users to access Tencent Cloud in VRF mode
ip route-static <vpn-instance vpn-instance-name> <ip-address> <mask | mask-length> <nexthop-
address> track nqa  <admin-name>< test-name>
such as ip route-static vpn-instance GLOBAL 9.0.0.0 255.0.0.0 10.128.152.1 track nqa user test
commit

문제 해결에 도움이 되었나요?
더 자세한 내용은 문의하기 또는 티켓 제출 을 통해 문의할 수 있습니다.
예
아니오

피드백