You can modify configurations including bandwidth of a connected dedicated tunnel in the Direct Connect console. This document describes how to modify the bandwidth of a 1.0 or 2.0 tunnel in the console.
Note:
For a shared connection, only the connection owner can modify the bandwidth of a dedicated tunnel.
1. Log in to the Direct Connect console and click Exclusive virtual interface in the left sidebar.
2. On the Exclusive virtual interface page, find the dedicated tunnel to be modified, and choose More > Change tunnel in the Operation column.
3. Modify the bandwidth cap in the Change tunnel pop-up window and click OK.
Note:
If the tunnel bandwidth is greater than 1 Gbps, you can increase the bandwidth value by an integer multiple of 1 Gbps, such as 2 Gbps and 3 Gbps.
Dedicated Tunnel 2.0
1. Log in to the Direct Connect console and click Exclusive virtual interface in the left sidebar.
2. Find the target exclusive dedicated tunnel, and click
in the Bandwidth column.
Note:
You can modify the bandwidth only for a dedicated tunnel that is in the Connected state.
3. Specify a new bandwidth value in the edit box and click OK.
Note:
The tunnel bandwidth cap cannot exceed the maximum bandwidth of the associated connection. You can submit a ticket to increase the connection bandwidth.
