tencent cloud

PrevNext

フィードバック

キーワードで検索してください

Recent Pages

ドキュメント
Tencent Real-Time Communication
    ドキュメント

    Type Definition

    最終更新日:2024-03-07 15:33:58
      Copyright (c) 2021 Tencent. All rights reserved.
      
      Module: TRTC key class definition
      
      Description: definitions of enumerated and constant values such as resolution and quality level
      Type Definition

      StructType

      FuncList
      DESC
      Room entry parameters
      Video encoding parameters
      Network QoS control parameter set
      Rendering parameters of video image
      Network quality
      Volume
      Network speed testing parameters
      Network speed test result
      Video texture data
      Video frame information
      Audio frame data
      Description information of each video image in On-Cloud MixTranscoding
      Layout and transcoding parameters of On-Cloud MixTranscoding
      Push parameters required to be set when publishing audio/video streams to non-Tencent Cloud CDN
      Local audio file recording parameters
      Local media file recording parameters
      Sound effect parameter (disused)
      Room switch parameter
      Format parameter of custom audio callback
      Structure for storing window thumbnails and icons.
      The users whose streams to publish
      The destination URL when you publish to Tencent Cloud or a third-party CDN
      The publishing destination
      The video layout of the transcoded stream
      The watermark layout
      The encoding parameters
      The transcoding parameters
      Media Stream Private Encryption Configuration
      Volume evaluation and other related parameter settings.

      EnumType

      EnumType
      DESC
      Video resolution
      Video aspect ratio mode
      Video stream type
      Video image fill mode
      Video image rotation direction
      Beauty (skin smoothing) filter algorithm
      Video pixel format
      Video data transfer method
      Video mirror type
      Data source of local video screenshot
      Use cases
      Role
      QoS control mode (disused)
      Image quality preference
      Network quality
      Audio/Video playback status
      Reasons for playback status changes
      Sound quality
      Audio frame content format
      Audio callback data operation mode
      Log level
      Screen sharing target type (for desktops only)
      Layout mode of On-Cloud MixTranscoding
      Media recording type
      Stream mix input type
      Watermark image source type
      Audio recording content type
      The publishing mode
      Encryption Algorithm
      Speed Test Scene
      Set the adaptation mode of gravity sensing (only applicable to mobile terminals)

      TRTCVideoResolution

      TRTCVideoResolution

      Video resolution

      Here, only the landscape resolution (e.g., 640x360) is defined. If the portrait resolution (e.g., 360x640) needs to be used, Portrait must be selected for TRTCVideoResolutionMode .
      Enum
      Value
      DESC
      TRTCVideoResolution_120_120
      1
      Aspect ratio: 1:1; resolution: 120x120; recommended bitrate (VideoCall): 80 Kbps; recommended bitrate (LIVE): 120 Kbps.
      TRTCVideoResolution_160_160
      3
      Aspect ratio: 1:1; resolution: 160x160; recommended bitrate (VideoCall): 100 Kbps; recommended bitrate (LIVE): 150 Kbps.
      TRTCVideoResolution_270_270
      5
      Aspect ratio: 1:1; resolution: 270x270; recommended bitrate (VideoCall): 200 Kbps; recommended bitrate (LIVE): 300 Kbps.
      TRTCVideoResolution_480_480
      7
      Aspect ratio: 1:1; resolution: 480x480; recommended bitrate (VideoCall): 350 Kbps; recommended bitrate (LIVE): 500 Kbps.
      TRTCVideoResolution_160_120
      50
      Aspect ratio: 4:3; resolution: 160x120; recommended bitrate (VideoCall): 100 Kbps; recommended bitrate (LIVE): 150 Kbps.
      TRTCVideoResolution_240_180
      52
      Aspect ratio: 4:3; resolution: 240x180; recommended bitrate (VideoCall): 150 Kbps; recommended bitrate (LIVE): 250 Kbps.
      TRTCVideoResolution_280_210
      54
      Aspect ratio: 4:3; resolution: 280x210; recommended bitrate (VideoCall): 200 Kbps; recommended bitrate (LIVE): 300 Kbps.
      TRTCVideoResolution_320_240
      56
      Aspect ratio: 4:3; resolution: 320x240; recommended bitrate (VideoCall): 250 Kbps; recommended bitrate (LIVE): 375 Kbps.
      TRTCVideoResolution_400_300
      58
      Aspect ratio: 4:3; resolution: 400x300; recommended bitrate (VideoCall): 300 Kbps; recommended bitrate (LIVE): 450 Kbps.
      TRTCVideoResolution_480_360
      60
      Aspect ratio: 4:3; resolution: 480x360; recommended bitrate (VideoCall): 400 Kbps; recommended bitrate (LIVE): 600 Kbps.
      TRTCVideoResolution_640_480
      62
      Aspect ratio: 4:3; resolution: 640x480; recommended bitrate (VideoCall): 600 Kbps; recommended bitrate (LIVE): 900 Kbps.
      TRTCVideoResolution_960_720
      64
      Aspect ratio: 4:3; resolution: 960x720; recommended bitrate (VideoCall): 1000 Kbps; recommended bitrate (LIVE): 1500 Kbps.
      TRTCVideoResolution_160_90
      100
      Aspect ratio: 16:9; resolution: 160x90; recommended bitrate (VideoCall): 150 Kbps; recommended bitrate (LIVE): 250 Kbps.
      TRTCVideoResolution_256_144
      102
      Aspect ratio: 16:9; resolution: 256x144; recommended bitrate (VideoCall): 200 Kbps; recommended bitrate (LIVE): 300 Kbps.
      TRTCVideoResolution_320_180
      104
      Aspect ratio: 16:9; resolution: 320x180; recommended bitrate (VideoCall): 250 Kbps; recommended bitrate (LIVE): 400 Kbps.
      TRTCVideoResolution_480_270
      106
      Aspect ratio: 16:9; resolution: 480x270; recommended bitrate (VideoCall): 350 Kbps; recommended bitrate (LIVE): 550 Kbps.
      TRTCVideoResolution_640_360
      108
      Aspect ratio: 16:9; resolution: 640x360; recommended bitrate (VideoCall): 500 Kbps; recommended bitrate (LIVE): 900 Kbps.
      TRTCVideoResolution_960_540
      110
      Aspect ratio: 16:9; resolution: 960x540; recommended bitrate (VideoCall): 850 Kbps; recommended bitrate (LIVE): 1300 Kbps.
      TRTCVideoResolution_1280_720
      112
      Aspect ratio: 16:9; resolution: 1280x720; recommended bitrate (VideoCall): 1200 Kbps; recommended bitrate (LIVE): 1800 Kbps.
      TRTCVideoResolution_1920_1080
      114
      Aspect ratio: 16:9; resolution: 1920x1080; recommended bitrate (VideoCall): 2000 Kbps; recommended bitrate (LIVE): 3000 Kbps.

      TRTCVideoResolutionMode

      TRTCVideoResolutionMode

      Video aspect ratio mode

      Only the landscape resolution (e.g., 640x360) is defined in TRTCVideoResolution . If the portrait resolution (e.g., 360x640) needs to be used, Portrait must be selected for TRTCVideoResolutionMode .
      Enum
      Value
      DESC
      TRTCVideoResolutionModeLandscape
      0
      Landscape resolution, such as TRTCVideoResolution_640_360 + TRTCVideoResolutionModeLandscape = 640x360.
      TRTCVideoResolutionModePortrait
      1
      Portrait resolution, such as TRTCVideoResolution_640_360 + TRTCVideoResolutionModePortrait = 360x640.

      TRTCVideoStreamType

      TRTCVideoStreamType

      Video stream type

      TRTC provides three different video streams, including:
      HD big image: it is generally used to transfer video data from the camera.
      Smooth small image: it has the same content as the big image, but with lower resolution and bitrate and thus lower definition.
      Substream image: it is generally used for screen sharing. Only one user in the room is allowed to publish the substream video image at any time, while other users must wait for this user to close the substream before they can publish their own substream.
      Note
      The SDK does not support enabling the smooth small image alone, which must be enabled together with the big image. It will automatically set the resolution and bitrate of the small image.
      Enum
      Value
      DESC
      TRTCVideoStreamTypeBig
      0
      HD big image: it is generally used to transfer video data from the camera.
      TRTCVideoStreamTypeSmall
      1
      Smooth small image: it has the same content as the big image, but with lower resolution and bitrate and thus lower definition.
      TRTCVideoStreamTypeSub
      2
      Substream image: it is generally used for screen sharing. Only one user in the room is allowed to publish the substream video image at any time, while other users must wait for this user to close the substream before they can publish their own substream.

      TRTCVideoFillMode

      TRTCVideoFillMode

      Video image fill mode

      If the aspect ratio of the video display area is not equal to that of the video image, you need to specify the fill mode:
      Enum
      Value
      DESC
      TRTCVideoFillMode_Fill
      0
      Fill mode: the video image will be centered and scaled to fill the entire display area, where parts that exceed the area will be cropped. The displayed image may be incomplete in this mode.
      TRTCVideoFillMode_Fit
      1
      Fit mode: the video image will be scaled based on its long side to fit the display area, where the short side will be filled with black bars. The displayed image is complete in this mode, but there may be black bars.

      TRTCVideoRotation

      TRTCVideoRotation

      Video image rotation direction

      TRTC provides rotation angle setting APIs for local and remote images. The following rotation angles are all clockwise.
      Enum
      Value
      DESC
      TRTCVideoRotation0
      0
      No rotation
      TRTCVideoRotation90
      1
      Clockwise rotation by 90 degrees
      TRTCVideoRotation180
      2
      Clockwise rotation by 180 degrees
      TRTCVideoRotation270
      3
      Clockwise rotation by 270 degrees

      TRTCBeautyStyle

      TRTCBeautyStyle

      Beauty (skin smoothing) filter algorithm

      TRTC has multiple built-in skin smoothing algorithms. You can select the one most suitable for your product.
      Enum
      Value
      DESC
      TRTCBeautyStyleSmooth
      0
      Smooth style, which uses a more radical algorithm for more obvious effect and is suitable for show live streaming.
      TRTCBeautyStyleNature
      1
      Natural style, which retains more facial details for more natural effect and is suitable for most live streaming use cases.

      TRTCVideoPixelFormat

      TRTCVideoPixelFormat

      Video pixel format

      TRTC provides custom video capturing and rendering features.
      For the custom capturing feature, you can use the following enumerated values to describe the pixel format of the video you capture.
      For the custom rendering feature, you can specify the pixel format of the video you expect the SDK to call back.
      Enum
      Value
      DESC
      TRTCVideoPixelFormat_Unknown
      0
      Undefined format
      TRTCVideoPixelFormat_I420
      1
      YUV420P (I420) format
      TRTCVideoPixelFormat_Texture_2D
      2
      OpenGL 2D texture format
      TRTCVideoPixelFormat_BGRA32
      3
      BGRA32 format
      TRTCVideoPixelFormat_NV21
      4
      NV21 format
      TRTCVideoPixelFormat_RGBA32
      5
      RGBA format

      TRTCVideoBufferType

      TRTCVideoBufferType

      Video data transfer method

      For custom capturing and rendering features, you need to use the following enumerated values to specify the method of transferring video data:
      Method 1. This method uses memory buffer to transfer video data. It is efficient on iOS but inefficient on Android. It is the only method supported on Windows currently.
      Method 2. This method uses texture to transfer video data. It is efficient on both iOS and Android but is not supported on Windows. To use this method, you should have a general familiarity with OpenGL programming.
      Enum
      Value
      DESC
      TRTCVideoBufferType_Unknown
      0
      Undefined transfer method
      TRTCVideoBufferType_Buffer
      1
      Use memory buffer to transfer video data. iOS: PixelBuffer ; Android: Direct Buffer for JNI layer; Windows: memory data block.
      TRTCVideoBufferType_Texture
      3
      Use texture to transfer video data

      TRTCVideoMirrorType

      TRTCVideoMirrorType

      Video mirror type

      Video mirroring refers to the left-to-right flipping of the video image, especially for the local camera preview image. After mirroring is enabled, it can bring anchors a familiar "look into the mirror" experience.
      Enum
      Value
      DESC
      TRTCVideoMirrorType_Auto
      0
      Auto mode: mirror the front camera's image but not the rear camera's image (for mobile devices only).
      TRTCVideoMirrorType_Enable
      1
      Mirror the images of both the front and rear cameras.
      TRTCVideoMirrorType_Disable
      2
      Disable mirroring for both the front and rear cameras.

      TRTCSnapshotSourceType

      TRTCSnapshotSourceType

      Data source of local video screenshot

      The SDK can take screenshots from the following two data sources and save them as local files:
      Video stream: the SDK screencaptures the native video content from the video stream. The screenshots are not controlled by the display of the rendering control.
      Rendering layer: the SDK screencaptures the displayed video content from the rendering control, which can achieve the effect of WYSIWYG, but if the display area is too small, the screenshots will also be very small.
      Enum
      Value
      DESC
      TRTCSnapshotSourceTypeStream
      0
      The SDK screencaptures the native video content from the video stream. The screenshots are not controlled by the display of the rendering control.
      TRTCSnapshotSourceTypeView
      1
      The SDK screencaptures the displayed video content from the rendering control, which can achieve the effect of WYSIWYG, but if the display area is too small, the screenshots will also be very small.

      TRTCAppScene

      TRTCAppScene

      Use cases

      TRTC features targeted optimizations for common audio/video application scenarios to meet the differentiated requirements in various verticals. The main scenarios can be divided into the following two categories:
      Live streaming scenario (LIVE): including LIVE (audio + video) and VoiceChatRoom (pure audio).
      In the live streaming scenario, users are divided into two roles: "anchor" and "audience". A single room can sustain up to 100,000 concurrent online users. This is suitable for live streaming to a large audience.
      Real-Time scenario (RTC): including VideoCall (audio + video) and AudioCall (pure audio).
      In the real-time scenario, there is no role difference between users, but a single room can sustain only up to 300 concurrent online users. This is suitable for small-scale real-time communication.
      Enum
      Value
      DESC
      TRTCAppSceneVideoCall
      0
      In the video call scenario, 720p and 1080p HD image quality is supported. A single room can sustain up to 300 concurrent online users, and up to 50 of them can speak simultaneously.
      Use cases: [one-to-one video call], [video conferencing with up to 300 participants], [online medical diagnosis], [small class], [video interview], etc.
      TRTCAppSceneLIVE
      1
      In the interactive video live streaming scenario, mic can be turned on/off smoothly without waiting for switchover, and the anchor latency is as low as less than 300 ms. Live streaming to hundreds of thousands of concurrent users in the audience role is supported with the playback latency down to 1,000 ms.
      Use cases: [low-latency interactive live streaming], [big class], [anchor competition], [video dating room], [online interactive classroom], [remote training], [large-scale conferencing], etc.
      Note
      In this scenario, you must use the role field in TRTCParams to specify the role of the current user.
      TRTCAppSceneAudioCall
      2
      Audio call scenario, where the SPEECH sound quality is used by default. A single room can sustain up to 300 concurrent online users, and up to 50 of them can speak simultaneously.
      Use cases: [one-to-one audio call], [audio conferencing with up to 300 participants], [audio chat], [online Werewolf], etc.
      TRTCAppSceneVoiceChatRoom
      3
      In the interactive audio live streaming scenario, mic can be turned on/off smoothly without waiting for switchover, and the anchor latency is as low as less than 300 ms. Live streaming to hundreds of thousands of concurrent users in the audience role is supported with the playback latency down to 1,000 ms.
      Use cases: [audio club], [online karaoke room], [music live room], [FM radio], etc.
      Note
      In this scenario, you must use the role field in TRTCParams to specify the role of the current user.

      TRTCRoleType

      TRTCRoleType

      Role

      Role is applicable only to live streaming scenarios ( TRTCAppSceneLIVE and TRTCAppSceneVoiceChatRoom ). Users are divided into two roles:
      Anchor, who can publish their audio/video streams. There is a limit on the number of anchors. Up to 50 anchors are allowed to publish streams at the same time in one room.
      Audience, who can only listen to or watch audio/video streams of anchors in the room. If they want to publish their streams, they need to switch to the "anchor" role first through switchRole. One room can sustain up to 100,000 concurrent online users in the audience role.
      Enum
      Value
      DESC
      TRTCRoleAnchor
      20
      An anchor can publish their audio/video streams. There is a limit on the number of anchors. Up to 50 anchors are allowed to publish streams at the same time in one room.
      TRTCRoleAudience
      21
      Audience can only listen to or watch audio/video streams of anchors in the room. If they want to publish their streams, they need to switch to the "anchor" role first through switchRole. One room can sustain up to 100,000 concurrent online users in the audience role.

      TRTCQosControlMode(Deprecated)

      TRTCQosControlMode(Deprecated)

      QoS control mode (disused)

      Enum
      Value
      DESC
      TRTCQosControlModeClient
      0
      Client-based control, which is for internal debugging of SDK and shall not be used by users.
      TRTCQosControlModeServer
      1
      On-cloud control, which is the default and recommended mode.

      TRTCVideoQosPreference

      TRTCVideoQosPreference

      Image quality preference

      TRTC has two control modes in weak network environments: "ensuring clarity" and "ensuring smoothness". Both modes will give priority to the transfer of audio data.
      Enum
      Value
      DESC
      TRTCVideoQosPreferenceSmooth
      1
      Ensuring smoothness: in this mode, when the current network is unable to transfer a clear and smooth video image, the smoothness of the image will be given priority, but there will be blurs.
      TRTCVideoQosPreferenceClear
      2
      Ensuring clarity (default value): in this mode, when the current network is unable to transfer a clear and smooth video image, the clarity of the image will be given priority, but there will be lags.

      TRTCQuality

      TRTCQuality

      Network quality

      TRTC evaluates the current network quality once every two seconds. The evaluation results are divided into six levels: Excellent indicates the best, and Down indicates the worst.
      Enum
      Value
      DESC
      TRTCQuality_Unknown
      0
      Undefined
      TRTCQuality_Excellent
      1
      The current network is excellent
      TRTCQuality_Good
      2
      The current network is good
      TRTCQuality_Poor
      3
      The current network is fair
      TRTCQuality_Bad
      4
      The current network is bad
      TRTCQuality_Vbad
      5
      The current network is very bad
      TRTCQuality_Down
      6
      The current network cannot meet the minimum requirements of TRTC

      TRTCAVStatusType

      TRTCAVStatusType

      Audio/Video playback status

      This enumerated type is used in the video status changed API onRemoteVideoStatusUpdated to specify the current video status.
      Enum
      Value
      DESC
      TRTCAVStatusStopped
      0
      Stopped
      TRTCAVStatusPlaying
      1
      Playing
      TRTCAVStatusLoading
      2
      Loading

      TRTCAVStatusChangeReason

      TRTCAVStatusChangeReason

      Reasons for playback status changes

      This enumerated type is used in the video status changed API onRemoteVideoStatusUpdated to specify the reason for the current video status change.
      Enum
      Value
      DESC
      TRTCAVStatusChangeReasonInternal
      0
      Default value
      TRTCAVStatusChangeReasonBufferingBegin
      1
      The stream enters the Loading state due to network congestion
      TRTCAVStatusChangeReasonBufferingEnd
      2
      The stream enters the Playing state after network recovery
      TRTCAVStatusChangeReasonLocalStarted
      3
      As a start-related API was directly called locally, the stream enters the Playing state
      TRTCAVStatusChangeReasonLocalStopped
      4
      As a stop-related API was directly called locally, the stream enters the Stopped state
      TRTCAVStatusChangeReasonRemoteStarted
      5
      As the remote user started (or resumed) publishing the video stream, the stream enters the Loading or Playing state
      TRTCAVStatusChangeReasonRemoteStopped
      6
      As the remote user stopped (or paused) publishing the video stream, the stream enters the "Stopped" state

      TRTCAudioQuality

      TRTCAudioQuality

      Sound quality

      TRTC provides three well-tuned modes to meet the differentiated requirements for sound quality in various verticals:
      Speech mode (Speech): it is suitable for application scenarios that focus on human communication. In this mode, the audio transfer is more resistant, and TRTC uses various voice processing technologies to ensure the optimal smoothness even in weak network environments.
      Music mode (Music): it is suitable for scenarios with demanding requirements for music. In this mode, the amount of transferred audio data is very large, and TRTC uses various technologies to ensure that the high-fidelity details of music signals can be restored in each frequency band.
      Default mode (Default): it is between Speech and Music . In this mode, the reproduction of music is better than that in Speech mode, and the amount of transferred data is much lower than that in Music mode; therefore, this mode has good adaptability to various scenarios.
      Enum
      Value
      DESC
      TRTCAudioQualitySpeech
      1
      Speech mode: sample rate: 16 kHz; mono channel; bitrate: 16 Kbps. This mode has the best resistance among all modes and is suitable for audio call scenarios, such as online meeting and audio call.
      TRTCAudioQualityDefault
      2
      Default mode: sample rate: 48 kHz; mono channel; bitrate: 50 Kbps. This mode is between the speech mode and the music mode as the default mode in the SDK and is recommended.
      TRTCAudioQualityMusic
      3
      Music mode: sample rate: 48 kHz; full-band stereo; bitrate: 128 Kbps. This mode is suitable for scenarios where Hi-Fi music transfer is required, such as online karaoke and music live streaming.

      TRTCAudioFrameFormat

      TRTCAudioFrameFormat

      Audio frame content format

      Enum
      Value
      DESC
      TRTCAudioFrameFormatNone
      0
      None
      TRTCAudioFrameFormatPCM
      Not Defined
      Audio data in PCM format

      TRTCAudioFrameOperationMode

      TRTCAudioFrameOperationMode

      Audio callback data operation mode

      TRTC provides two modes of operation for audio callback data.
      Read-only mode (ReadOnly): Get audio data only from the callback.
      ReadWrite mode (ReadWrite): You can get and modify the audio data of the callback.
      Enum
      Value
      DESC
      TRTCAudioFrameOperationModeReadWrite
      0
      Read-write mode: You can get and modify the audio data of the callback, the default mode.
      TRTCAudioFrameOperationModeReadOnly
      1
      Read-only mode: Get audio data from callback only.

      TRTCLogLevel

      TRTCLogLevel

      Log level

      Different log levels indicate different levels of details and number of logs. We recommend you set the log level to TRTCLogLevelInfo generally.
      Enum
      Value
      DESC
      TRTCLogLevelVerbose
      0
      Output logs at all levels
      TRTCLogLevelDebug
      1
      Output logs at the DEBUG, INFO, WARNING, ERROR, and FATAL levels
      TRTCLogLevelInfo
      2
      Output logs at the INFO, WARNING, ERROR, and FATAL levels
      TRTCLogLevelWarn
      3
      Output logs at the WARNING, ERROR, and FATAL levels
      TRTCLogLevelError
      4
      Output logs at the ERROR and FATAL levels
      TRTCLogLevelFatal
      5
      Output logs at the FATAL level
      TRTCLogLevelNone
      6
      Do not output any SDK logs

      TRTCScreenCaptureSourceType

      TRTCScreenCaptureSourceType

      Screen sharing target type (for desktops only)

      Enum
      Value
      DESC
      TRTCScreenCaptureSourceTypeUnknown
      -1
      Undefined
      TRTCScreenCaptureSourceTypeWindow
      0
      The screen sharing target is the window of an application
      TRTCScreenCaptureSourceTypeScreen
      1
      The screen sharing target is the entire screen
      TRTCScreenCaptureSourceTypeCustom
      2
      The screen sharing target is a user-defined data source

      TRTCTranscodingConfigMode

      TRTCTranscodingConfigMode

      Layout mode of On-Cloud MixTranscoding

      TRTC's On-Cloud MixTranscoding service can mix multiple audio/video streams in the room into one stream. Therefore, you need to specify the layout scheme of the video images. The following layout modes are provided:
      Enum
      Value
      DESC
      TRTCTranscodingConfigMode_Unknown
      0
      Undefined
      TRTCTranscodingConfigMode_Manual
      1
      Manual layout mode
      In this mode, you need to specify the precise position of each video image. This mode has the highest degree of freedom, but its ease of use is the worst:
      You need to enter all the parameters in TRTCTranscodingConfig , including the position coordinates of each video image (TRTCMixUser).
      You need to listen on the onUserVideoAvailable() and onUserAudioAvailable() event callbacks in TRTCCloudDelegate and constantly adjust the mixUsers parameter according to the audio/video status of each user with mic on in the current room.
      TRTCTranscodingConfigMode_Template_PureAudio
      2
      Pure audio mode
      This mode is suitable for pure audio scenarios such as audio call (AudioCall) and audio chat room (VoiceChatRoom).
      You only need to set it once through the setMixTranscodingConfig() API after room entry, and then the SDK will automatically mix the audio of all mic-on users in the room into the current user's live stream.
      You don't need to set the mixUsers parameter in TRTCTranscodingConfig ; instead, you only need to set the audioSampleRate , audioBitrate and audioChannels parameters.
      TRTCTranscodingConfigMode_Template_PresetLayout
      3
      Preset layout mode
      This is the most popular layout mode, because it allows you to set the position of each video image in advance through placeholders, and then the SDK automatically adjusts it dynamically according to the number of video images in the room.
      In this mode, you still need to set the mixUsers parameter, but you can set userId as a "placeholder". Placeholder values include:
      "$PLACE_HOLDER_REMOTE$": image of remote user. Multiple images can be set.
      "$PLACE_HOLDER_LOCAL_MAIN$": local camera image. Only one image can be set.
      "$PLACE_HOLDER_LOCAL_SUB$": local screen sharing image. Only one image can be set.
      In this mode, you don't need to listen on the onUserVideoAvailable() and onUserAudioAvailable() callbacks in TRTCCloudDelegate to make real-time adjustments.
      Instead, you only need to call setMixTranscodingConfig() once after successful room entry. Then, the SDK will automatically populate the placeholders you set with real userId values.
      TRTCTranscodingConfigMode_Template_ScreenSharing
      4
      Screen sharing mode
      This mode is suitable for screen sharing-based use cases such as online education and supported only by the SDKs for Windows and macOS.
      In this mode, the SDK will first build a canvas according to the target resolution you set (through the videoWidth and videoHeight parameters).
      Before the teacher enables screen sharing, the SDK will scale up the teacher's camera image and draw it onto the canvas.
      After the teacher enables screen sharing, the SDK will draw the video image shared on the screen onto the same canvas.
      The purpose of this layout mode is to ensure consistency in the output resolution of the mixtranscoding module and avoid problems with blurred screen during course replay and webpage playback (web players don't support adjustable resolution).
      Meanwhile, the audio of mic-on students will be mixed into the teacher's audio/video stream by default.
      Video content is primarily the shared screen in teaching mode, and it is a waste of bandwidth to transfer camera image and screen image at the same time.
      Therefore, the recommended practice is to directly draw the camera image onto the current screen through the setLocalVideoRenderCallback API.
      In this mode, you don't need to set the mixUsers parameter in TRTCTranscodingConfig , and the SDK will not mix students' images so as not to interfere with the screen sharing effect.
      You can set width x height in TRTCTranscodingConfig to 0 px x 0 px, and the SDK will automatically calculate a suitable resolution based on the aspect ratio of the user's current screen.
      If the teacher's current screen width is less than or equal to 1920 px, the SDK will use the actual resolution of the teacher's current screen.
      If the teacher's current screen width is greater than 1920 px, the SDK will select one of the three resolutions of 1920x1080 (16:9), 1920x1200 (16:10), and 1920x1440 (4:3) according to the current screen aspect ratio.

      TRTCRecordType

      TRTCRecordType

      Media recording type

      This enumerated type is used in the local media recording API startLocalRecording to specify whether to record audio/video files or pure audio files.
      Enum
      Value
      DESC
      TRTCLocalRecordType_Audio
      0
      Record audio only
      TRTCLocalRecordType_Video
      1
      Record video only
      TRTCLocalRecordType_Both
      2
      Record both audio and video

      TRTCMixInputType

      TRTCMixInputType

      Stream mix input type

      Enum
      Value
      DESC
      TRTCMixInputTypeUndefined
      0
      Default.
      Considering the compatibility with older versions, if you specify the inputType as Undefined, the SDK will determine the stream mix input type according to the value of the pureAudio parameter
      TRTCMixInputTypeAudioVideo
      1
      Mix both audio and video
      TRTCMixInputTypePureVideo
      2
      Mix video only
      TRTCMixInputTypePureAudio
      3
      Mix audio only
      TRTCMixInputTypeWatermark
      4
      Mix watermark
      In this case, you don't need to specify the userId parameter, but you need to specify the image parameter. It is recommended to use png format.

      TRTCWaterMarkSrcType

      TRTCWaterMarkSrcType

      Watermark image source type

      Enum
      Value
      DESC
      TRTCWaterMarkSrcTypeFile
      0
      Path of the image file, which can be in BMP, GIF, JPEG, PNG, TIFF, Exif, WMF, or EMF format
      TRTCWaterMarkSrcTypeBGRA32
      1
      Memory block in BGRA32 format
      TRTCWaterMarkSrcTypeRGBA32
      2
      Memory block in RGBA32 format

      TRTCAudioRecordingContent

      TRTCAudioRecordingContent

      Audio recording content type

      This enumerated type is used in the audio recording API startAudioRecording to specify the content of the recorded audio.
      Enum
      Value
      DESC
      TRTCAudioRecordingContentAll
      0
      Record both local and remote audio
      TRTCAudioRecordingContentLocal
      1
      Record local audio only
      TRTCAudioRecordingContentRemote
      2
      Record remote audio only

      TRTCPublishMode

      TRTCPublishMode

      The publishing mode

      This enum type is used by the publishing API startPublishMediaStream.
      TRTC can mix multiple streams in a room and publish the mixed stream to a CDN or to a TRTC room. It can also publish the stream of the local user to Tencent Cloud or a third-party CDN.
      You can specify one of the following publishing modes to use:
      Enum
      Value
      DESC
      TRTCPublishModeUnknown
      0
      Undefined
      TRTCPublishBigStreamToCdn
      1
      Use this parameter to publish the primary stream (TRTCVideoStreamTypeBig) in the room to Tencent Cloud or a third-party CDN (only RTMP is supported).
      TRTCPublishSubStreamToCdn
      2
      Use this parameter to publish the substream (TRTCVideoStreamTypeSub) in the room to Tencent Cloud or a third-party CDN (only RTMP is supported).
      TRTCPublishMixStreamToCdn
      3
      Use this parameter together with the encoding parameter TRTCStreamEncoderParam and On-Cloud MixTranscoding parameter TRTCStreamMixingConfig to transcode the streams you specify and publish the mixed stream to Tencent Cloud or a third-party CDN (only RTMP is supported).
      TRTCPublishMixStreamToRoom
      4
      Use this parameter together with the encoding parameter TRTCStreamEncoderParam and On-Cloud MixTranscoding parameter TRTCStreamMixingConfig to transcode the streams you specify and publish the mixed stream to the room you specify.
      Use TRTCUser in TRTCPublishTarget to specify the robot that publishes the transcoded stream to a TRTC room.

      TRTCEncryptionAlgorithm

      TRTCEncryptionAlgorithm

      Encryption Algorithm

      This enumeration type is used for media stream private encryption algorithm selection.
      Enum
      Value
      DESC
      TRTCEncryptionAlgorithmAes128Gcm
      0
      AES GCM 128。
      TRTCEncryptionAlgorithmAes256Gcm
      1
      AES GCM 256。

      TRTCSpeedTestScene

      TRTCSpeedTestScene

      Speed Test Scene

      This enumeration type is used for speed test scene selection.
      Enum
      Value
      DESC
      TRTCSpeedTestScene_DelayTesting
      1
      Delay testing.
      TRTCSpeedTestScene_DelayAndBandwidthTesting
      2
      Delay and bandwidth testing.
      TRTCSpeedTestScene_OnlineChorusTesting
      3
      Online chorus testing.

      TRTCGravitySensorAdaptiveMode

      TRTCGravitySensorAdaptiveMode

      Set the adaptation mode of gravity sensing (only applicable to mobile terminals)

      Enum
      Value
      DESC
      TRTCGravitySensorAdaptiveMode_Disable
      0
      Turn off the gravity sensor and make a decision based on the current acquisition resolution and the set encoding resolution. If the two are inconsistent, rotate 90 degrees to ensure the maximum frame.
      TRTCGravitySensorAdaptiveMode_FillByCenterCrop
      1
      Turn on the gravity sensor to always ensure that the remote screen image is positive. When the intermediate process needs to deal with inconsistent resolutions, use the center cropping mode.
      TRTCGravitySensorAdaptiveMode_FitWithBlackBorder
      2
      Turn on the gravity sensor to always ensure that the remote screen image is positive. When the resolution needs to be processed inconsistently in the intermediate process, use the superimposed black border mode.

      TRTCParams

      TRTCParams

      Room entry parameters

      As the room entry parameters in the TRTC SDK, these parameters must be correctly set so that the user can successfully enter the audio/video room specified by roomId or strRoomId .
      For historical reasons, TRTC supports two types of room IDs: roomId and strRoomId .
      Note: do not mix roomId and strRoomId , because they are not interchangeable. For example, the number 123 and the string 123 are two completely different rooms in TRTC.
      EnumType
      DESC
      businessInfo
      Field description: business data, which is optional. This field is needed only by some advanced features.
      Recommended value: do not set this field on your own.
      privateMapKey
      Field description: permission credential used for permission control, which is optional. If you want only users with the specified userId values to enter a room, you need to use privateMapKey to restrict the permission.
      Recommended value: we recommend you use this parameter only if you have high security requirements. For more information, please see Enabling Advanced Permission Control.
      role
      Field description: role in the live streaming scenario, which is applicable only to the live streaming scenario (TRTCAppSceneLIVE or TRTCAppSceneVoiceChatRoom) but doesn't take effect in the call scenario.
      Recommended value: default value: anchor (TRTCRoleAnchor).
      roomId
      Field description: numeric room ID. Users (userId) in the same room can see one another and make audio/video calls.
      Recommended value: value range: 1–4294967294.
      @note roomId and strRoomId are mutually exclusive. If you decide to use strRoomId , then roomId should be entered as 0. If both are entered, roomId will be used.
      Note
      do not mix roomId and strRoomId , because they are not interchangeable. For example, the number 123 and the string 123 are two completely different rooms in TRTC.
      sdkAppId
      Field description: application ID, which is required. Tencent Cloud generates bills based on sdkAppId .
      Recommended value: the ID can be obtained on the account information page in the TRTC console after the corresponding application is created.
      strRoomId
      Field description: string-type room ID. Users (userId) in the same room can see one another and make audio/video calls.
      @note roomId and strRoomId are mutually exclusive. If you decide to use strRoomId , then roomId should be entered as 0. If both are entered, roomId will be used.
      Note
      do not mix roomId and strRoomId , because they are not interchangeable. For example, the number 123 and the string 123 are two completely different rooms in TRTC.
      Recommended value: the length limit is 64 bytes. The following 89 characters are supported:
      Uppercase and lowercase letters (a–z and A–Z)
      Digits (0–9)
      Space, "!", "#", "$", "%", "&", "(", ")", "+", "-", ":", ";", "<", "=", ".", ">", "?", "@", "[", "]", "^", "_", "{", "}", "|", "~", and ",".
      streamId
      Field description: specified streamId in Tencent Cloud CSS, which is optional. After setting this field, you can play back the user's audio/video stream on Tencent Cloud CSS CDN through a standard pull scheme (FLV or HLS).
      Recommended value: this parameter can contain up to 64 bytes and can be left empty. We recommend you use sdkappid_roomid_userid_main as the streamid , which is easier to identify and will not cause conflicts in your multiple applications.
      Note
      to use Tencent Cloud CSS CDN, you need to enable the auto-relayed live streaming feature on the "Function Configuration" page in the console first.
      For more information, please see CDN Relayed Live Streaming.
      userDefineRecordId
      Field description: on-cloud recording field, which is optional and used to specify whether to record the user's audio/video stream in the cloud.
      For more information, please see On-Cloud Recording and Playback.
      Recommended value: it can contain up to 64 bytes. Letters (a–z and A–Z), digits (0–9), underscores, and hyphens are allowed.
      Scheme 1. Manual recording
      1. Enable on-cloud recording in "Application Management" > "On-cloud Recording Configuration" in the console.
      2. Set "Recording Mode" to "Manual Recording".
      3. After manual recording is set, in a TRTC room, only users with the userDefineRecordId parameter set will have video recording files in the cloud, while users without this parameter set will not.
      4. The recording file will be named in the format of "userDefineRecordId_start time_end time" in the cloud.
      Scheme 2. Auto-recording
      1. You need to enable on-cloud recording in "Application Management" > "On-cloud Recording Configuration" in the console.
      2. Set "Recording Mode" to "Auto-recording".
      3. After auto-recording is set, any user who upstreams audio/video in a TRTC room will have a video recording file in the cloud.
      4. The file will be named in the format of "userDefineRecordId_start time_end time". If userDefineRecordId is not specified, the file will be named in the format of "streamId_start time_end time".
      userId
      Field description: user ID, which is required. It is the userId of the local user in UTF-8 encoding and acts as the username.
      Recommended value: if the ID of a user in your account system is "mike", userId can be set to "mike".
      userSig
      Field description: user signature, which is required. It is the authentication signature corresponding to the current userId and acts as the login password for Tencent Cloud services.
      Recommended value: for the calculation method, please see UserSig.

      TRTCVideoEncParam

      TRTCVideoEncParam

      Video encoding parameters

      These settings determine the quality of image viewed by remote users as well as the image quality of recorded video files in the cloud.
      EnumType
      DESC
      enableAdjustRes
      Field description: whether to allow dynamic resolution adjustment. Once enabled, this field will affect on-cloud recording.
      Recommended value: this feature is suitable for scenarios that don't require on-cloud recording. After it is enabled, the SDK will intelligently select a suitable resolution according to the current network conditions to avoid the inefficient encoding mode of "large resolution + small bitrate".
      Note
      default value: false. If you need on-cloud recording, please do not enable this feature, because if the video resolution changes, the MP4 file recorded in the cloud cannot be played back normally by common players.
      minVideoBitrate
      Field description: minimum video bitrate. The SDK will reduce the bitrate to as low as the value specified by minVideoBitrate to ensure the smoothness only if the network conditions are poor.
      Note: default value: 0, indicating that a reasonable value of the lowest bitrate will be automatically calculated by the SDK according to the resolution you specify.
      Recommended value: you can set the videoBitrate and minVideoBitrate parameters at the same time to restrict the SDK's adjustment range of the video bitrate:
      If you want to "ensure clarity while allowing lag in weak network environments", you can set minVideoBitrate to 60% of videoBitrate .
      If you want to "ensure smoothness while allowing blur in weak network environments", you can set minVideoBitrate to a low value, for example, 100 Kbps.
      If you set videoBitrate and minVideoBitrate to the same value, it is equivalent to disabling the adaptive adjustment capability of the SDK for the video bitrate.
      resMode
      Field description: resolution mode (landscape/portrait)
      Recommended value: for mobile platforms (iOS and Android), Portrait is recommended; for desktop platforms (Windows and macOS), Landscape is recommended.
      Note
      to use a portrait resolution, please specify resMode as Portrait ; for example, when used together with Portrait , 640x360 represents 360x640.
      videoBitrate
      Field description: target video bitrate. The SDK encodes streams at the target video bitrate and will actively reduce the bitrate only in weak network environments.
      Recommended value: please see the optimal bitrate for each specification in TRTCVideoResolution . You can also slightly increase the optimal bitrate.
      For example, TRTCVideoResolution_1280_720 corresponds to the target bitrate of 1,200 Kbps. You can also set the bitrate to 1,500 Kbps for higher definition.
      Note
      you can set the videoBitrate and minVideoBitrate parameters at the same time to restrict the SDK's adjustment range of the video bitrate:
      If you want to "ensure clarity while allowing lag in weak network environments", you can set minVideoBitrate to 60% of videoBitrate .
      If you want to "ensure smoothness while allowing blur in weak network environments", you can set minVideoBitrate to a low value, for example, 100 Kbps.
      If you set videoBitrate and minVideoBitrate to the same value, it is equivalent to disabling the adaptive adjustment capability of the SDK for the video bitrate.
      videoFps
      Field description: video capturing frame rate
      Recommended value: 15 or 20 fps. If the frame rate is lower than 5 fps, there will be obvious lagging; if lower than 10 fps but higher than 5 fps, there will be slight lagging; if higher than 20 fps, the bandwidth will be wasted (the frame rate of movies is generally 24 fps).
      Note
      the front cameras on certain Android phones do not support a capturing frame rate higher than 15 fps. For some Android phones that focus on beautification features, the capturing frame rate of the front cameras may be lower than 10 fps.
      videoResolution
      Field description: video resolution
      Recommended value
      For mobile video call, we recommend you select a resolution of 360x640 or below and select Portrait (portrait resolution) for resMode .
      For mobile live streaming, we recommend you select a resolution of 540x960 and select Portrait (portrait resolution) for resMode .
      For desktop platforms (Windows and macOS), we recommend you select a resolution of 640x360 or above and select Landscape (landscape resolution) for resMode .
      Note
      to use a portrait resolution, please specify resMode as Portrait ; for example, when used together with Portrait , 640x360 represents 360x640.

      TRTCNetworkQosParam

      TRTCNetworkQosParam

      Network QoS control parameter set

      Network QoS control parameter. The settings determine the QoS control policy of the SDK in weak network conditions (e.g., whether to "ensure clarity" or "ensure smoothness").
      EnumType
      DESC
      controlMode
      Field description: QoS control mode (disused)
      Recommended value: on-cloud control
      Note
      please set the on-cloud control mode (TRTCQosControlModeServer).
      preference
      Field description: whether to ensure smoothness or clarity
      Recommended value: ensuring clarity
      Note
      this parameter mainly affects the audio/video performance of TRTC in weak network environments:
      Ensuring smoothness: in this mode, when the current network is unable to transfer a clear and smooth video image, the smoothness of the image will be given priority, but there will be blurs. See TRTCVideoQosPreferenceSmooth
      Ensuring clarity (default value): in this mode, when the current network is unable to transfer a clear and smooth video image, the clarity of the image will be given priority, but there will be lags. See TRTCVideoQosPreferenceClear

      TRTCRenderParams

      TRTCRenderParams

      Rendering parameters of video image

      You can use these parameters to control the video image rotation angle, fill mode, and mirror mode.
      EnumType
      DESC
      fillMode
      Field description: image fill mode
      Recommended value: fill (the image may be stretched or cropped) or fit (there may be black bars in unmatched areas). Default value: TRTCVideoFillMode_Fill
      mirrorType
      Field description: image mirror mode
      Recommended value: default value: TRTCVideoMirrorType_Auto
      rotation
      Field description: clockwise image rotation angle
      Recommended value: rotation angles of 90, 180, and 270 degrees are supported. Default value: TRTCVideoRotation_0

      TRTCQuality

      TRTCQuality

      Network quality

      This indicates the quality of the network. You can use it to display the network quality of each user on the UI.
      EnumType
      DESC
      quality
      Network quality
      userId
      User ID

      TRTCVolumeInfo

      TRTCVolumeInfo

      Volume

      This indicates the audio volume value. You can use it to display the volume of each user in the UI.
      EnumType
      DESC
      pitch
      The local user's vocal frequency (unit: Hz), the value range is [0 - 4000]. For remote users, this value is always 0.
      spectrumData
      Audio spectrum data, which divides the sound frequency into 256 frequency domains, spectrumData records the energy value of each frequency domain,
      The value range of each energy value is [-300, 0] in dBFS.
      Note
      The local spectrum is calculated using the audio data before encoding, which will be affected by the capture volume, BGM, etc.; the remote spectrum is calculated using the received audio data, and operations such as adjusting the remote playback volume locally will not affect it.
      spectrumDataLength
      The length of recorded audio spectrum data, which is 256.
      userId
      userId of the speaker. An empty value indicates the local user.
      vad
      Vad result of the local user. 0: not speech 1: speech.
      volume
      Volume of the speaker. Value range: 0–100.

      TRTCSpeedTestParams

      TRTCSpeedTestParams

      Network speed testing parameters

      You can test the network speed through the startSpeedTest: interface before the user enters the room (this API cannot be called during a call).
      EnumType
      DESC
      expectedDownBandwidth
      Expected downstream bandwidth (kbps, value range: 10 to 5000, no downlink bandwidth test when it is 0).
      Note
      When the parameter scene is set to TRTCSpeedTestScene_OnlineChorusTesting , in order to obtain more accurate information such as rtt / jitter, the value range is limited to 10 ~ 1000.
      expectedUpBandwidth
      Expected upstream bandwidth (kbps, value range: 10 to 5000, no uplink bandwidth test when it is 0).
      Note
      When the parameter scene is set to TRTCSpeedTestScene_OnlineChorusTesting , in order to obtain more accurate information such as rtt / jitter, the value range is limited to 10 ~ 1000.
      scene
      Speed test scene.
      sdkAppId
      Application identification, please refer to the relevant instructions in TRTCParams.
      userId
      User identification, please refer to the relevant instructions in TRTCParams.
      userSig
      User signature, please refer to the relevant instructions in TRTCParams.

      TRTCSpeedTestResult

      TRTCSpeedTestResult

      Network speed test result

      The startSpeedTest: API can be used to test the network speed before a user enters a room (this API cannot be called during a call).
      EnumType
      DESC
      availableDownBandwidth
      Downstream bandwidth (in kbps, -1: invalid value).
      availableUpBandwidth
      Upstream bandwidth (in kbps, -1: invalid value).
      downJitter
      Downlink data packet jitter (ms) refers to the stability of data communication in the user's current network environment. The smaller the value, the better. The normal value range is 0ms - 100ms. -1 means that the speed test failed to obtain an effective value. Generally, the Jitter of the WiFi network will be slightly larger than that of the 4G/5G environment.
      downLostRate
      Downstream packet loss rate between 0 and 1.0. For example, 0.2 indicates that 2 data packets may be lost in every 10 packets received from the server.
      errMsg
      Error message for network speed test.
      ip
      Server IP address.
      quality
      Network quality, which is tested and calculated based on the internal evaluation algorithm. For more information, please see TRTCQuality
      rtt
      Delay in milliseconds, which is the round-trip time between the current device and TRTC server. The smaller the value, the better. The normal value range is 10–100 ms.
      success
      Whether the network speed test is successful.
      upJitter
      Uplink data packet jitter (ms) refers to the stability of data communication in the user's current network environment. The smaller the value, the better. The normal value range is 0ms - 100ms. -1 means that the speed test failed to obtain an effective value. Generally, the Jitter of the WiFi network will be slightly larger than that of the 4G/5G environment.
      upLostRate
      Upstream packet loss rate between 0 and 1.0. For example, 0.3 indicates that 3 data packets may be lost in every 10 packets sent to the server.

      TRTCTexture

      TRTCTexture

      Video texture data

      EnumType
      DESC
      glContext
      Field description: The OpenGL context to which the texture corresponds。
      glTextureId
      Field description: video texture ID

      TRTCVideoFrame

      TRTCVideoFrame

      Video frame information

      TRTCVideoFrame is used to describe the raw data of a frame of the video image, which is the image data before frame encoding or after frame decoding.
      EnumType
      DESC
      bufferType
      Field description: video data structure type
      data
      Field description: video data when bufferType is TRTCVideoBufferType_Buffer, which carries the memory data blocks for the C++ layer.
      height
      Field description: video height
      Recommended value: please enter the height of the video data passed in.
      length
      Field description: video data length in bytes. For I420, length = width * height * 3 / 2; for BGRA32, length = width * height * 4.
      rotation
      Field description: clockwise rotation angle of video pixels
      texture
      Field description: video data when bufferType is TRTCVideoBufferType_Texture, which carries the texture data used for OpenGL rendering.
      timestamp
      Field description: video frame timestamp in milliseconds
      Recommended value: this parameter can be set to 0 for custom video capturing. In this case, the SDK will automatically set the timestamp field. However, please "evenly" set the calling interval of sendCustomVideoData .
      videoFormat
      Field description: video pixel format
      width
      Field description: video width
      Recommended value: please enter the width of the video data passed in.

      TRTCAudioFrame

      TRTCAudioFrame

      Audio frame data

      EnumType
      DESC
      audioFormat
      Field description: audio frame format
      channel
      Field description: number of sound channels
      data
      Field description: audio data
      extraData
      Field description: extra data in audio frame, message sent by remote users through onLocalProcessedAudioFrame that add to audio frame will be callback through this field.
      extraDataLength
      Field description: extra data length
      length
      Field description: audio data length
      sampleRate
      Field description: sample rate
      timestamp
      Field description: timestamp in ms

      TRTCMixUser

      TRTCMixUser

      Description information of each video image in On-Cloud MixTranscoding

      TRTCMixUser is used to specify the location, size, layer, and stream type of each video image in On-Cloud MixTranscoding.
      EnumType
      DESC
      image
      Field description: specify the placeholder or watermark image. The placeholder image will be displayed when there is no upstream video.A watermark image is a semi-transparent image posted in the mixed image, and this image will always be overlaid on the mixed image.
      When the inputType field is set to TRTCMixInputTypePureAudio, the image is a placeholder image, and you need to specify userId .
      When the inputType field is set to TRTCMixInputTypeWatermark, the image is a watermark image, and you don't need to specify userId .
      Recommended value: default value: null, indicating not to set the placeholder or watermark image.
      Note
      TRTC's backend service will mix the image specified by the URL address into the final stream.URL link length is limited to 512 bytes. The image size is limited to 10MB.Support png, jpg, jpeg, bmp format. Take effects iff the inputType field is set to TRTCMixInputTypePureAudio or TRTCMixInputTypeWatermark.
      inputType
      Field description: specify the mixed content of this stream (audio only, video only, audio and video, or watermark).
      Recommended value: default value: TRTCMixInputTypeUndefined.
      Note
      When specifying inputType as TRTCMixInputTypeUndefined and specifying pureAudio to YES, it is equivalent to setting inputType to TRTCMixInputTypePureAudio .
      When specifying inputType as TRTCMixInputTypeUndefined and specifying pureAudio to NO, it is equivalent to setting inputType to TRTCMixInputTypeAudioVideo .
      When specifying inputType as TRTCMixInputTypeWatermark, you don't need to specify the userId field, but you need to specify the image field.
      pureAudio
      Field description: specify whether this stream mixes audio only
      Recommended value: default value: false
      Note
      this field has been disused. We recommend you use the new field inputType introduced in v8.5.
      rect
      Field description: specify the coordinate area of this video image in px
      renderMode
      Field description: specify the display mode of this stream.
      Recommended value: default value: 0. 0 is cropping, 1 is zooming, 2 is zooming and displaying black background.
      Note
      image doesn't support setting renderMode temporarily, the default display mode is forced stretch.
      roomId
      Field description: ID of the room where this audio/video stream is located (an empty value indicates the local room ID)
      soundLevel
      Field description: specify the target volumn level of On-Cloud MixTranscoding. (value range: 0-100)
      Recommended value: default value: 100.
      streamType
      Field description: specify whether this video image is the primary stream image (TRTCVideoStreamTypeBig) or substream image (TRTCVideoStreamTypeSub).
      userId
      Field description: user ID
      zOrder
      Field description: specify the level of this video image (value range: 1–15; the value must be unique)

      TRTCTranscodingConfig

      TRTCTranscodingConfig

      Layout and transcoding parameters of On-Cloud MixTranscoding

      These parameters are used to specify the layout position information of each video image and the encoding parameters of mixtranscoding during On-Cloud MixTranscoding.
      EnumType
      DESC
      appId
      Field description: appId of Tencent Cloud CSS
      Recommended value: please click Application Management > Application Information in the TRTC console and get the appId in Relayed Live Streaming Info .
      audioBitrate
      Field description: specify the target audio bitrate of On-Cloud MixTranscoding
      Recommended value: default value: 64 Kbps. Value range: [32,192].
      audioChannels
      Field description: specify the number of sound channels of On-Cloud MixTranscoding
      Recommended value: default value: 1, which means mono channel. Valid values: 1: mono channel; 2: dual channel.
      audioCodec
      Field description: specify the audio encoding type of On-Cloud MixTranscoding
      Recommended value: default value: 0, which means LC-AAC. Valid values: 0: LC-AAC; 1: HE-AAC; 2: HE-AACv2.
      Note
      HE-AAC and HE-AACv2 only support [48000, 44100, 32000, 24000, 16000] sample rate.
      HE-AACv2 only support dual channel.
      HE-AAC and HE-AACv2 take effects iff the output streamId is specified.
      audioSampleRate
      Field description: specify the target audio sample rate of On-Cloud MixTranscoding
      Recommended value: default value: 48000 Hz. Valid values: 12000 Hz, 16000 Hz, 22050 Hz, 24000 Hz, 32000 Hz, 44100 Hz, 48000 Hz.
      backgroundColor
      Field description: specify the background color of the mixed video image.
      Recommended value: default value: 0x000000, which means black and is in the format of hex number; for example: "0x61B9F1" represents the RGB color (97,158,241).
      backgroundImage
      Field description: specify the background image of the mixed video image.
      **Recommended value: default value: null, indicating not to set the background image.
      Note
      TRTC's backend service will mix the image specified by the URL address into the final stream.URL link length is limited to 512 bytes. The image size is limited to 10MB.Support png, jpg, jpeg, bmp format.
      bizId
      Field description: bizId of Tencent Cloud CSS
      Recommended value: please click Application Management > Application Information in the TRTC console and get the bizId in Relayed Live Streaming Info .
      mixUsersArray
      Field description: specify the position, size, layer, and stream type of each video image in On-Cloud MixTranscoding
      Recommended value: this field is an array in TRTCMixUser type, where each element represents the information of a video image.
      mixUsersArraySize
      Field description: number of elements in the mixUsersArray array
      mode
      Field description: layout mode
      Recommended value: please choose a value according to your business needs. The preset mode has better applicability.
      streamId
      Field description: ID of the live stream output to CDN
      Recommended value: default value: null, that is, the audio/video streams in the room will be mixed into the audio/video stream of the caller of this API.
      If you don't set this parameter, the SDK will execute the default logic, that is, it will mix the multiple audio/video streams in the room into the audio/video stream of the caller of this API, i.e., A + B => A.
      If you set this parameter, the SDK will mix the audio/video streams in the room into the live stream you specify, i.e., A + B => C (C is the streamId you specify).
      videoBitrate
      Field description: specify the target video bitrate (Kbps) of On-Cloud MixTranscoding
      Recommended value: if you enter 0, TRTC will estimate a reasonable bitrate value based on videoWidth and videoHeight . You can also refer to the recommended bitrate value in the video resolution enumeration definition (in the comment section).
      videoFramerate
      Field description: specify the target video frame rate (fps) of On-Cloud MixTranscoding
      Recommended value: default value: 15 fps. Value range: (0,30].
      videoGOP
      Field description: specify the target video keyframe interval (GOP) of On-Cloud MixTranscoding
      Recommended value: default value: 2 (in seconds). Value range: [1,8].
      videoHeight
      Field description: specify the target resolution (height) of On-Cloud MixTranscoding
      Recommended value: 640 px. If you only mix audio streams, please set both width and height to 0; otherwise, there will be a black background in the live stream after mixtranscoding.
      videoSeiParams
      Field description: SEI parameters. default value: null
      Note
      the parameter is passed in the form of a JSON string. Here is an example to use it:
      `json
      {
      "payLoadContent":"xxx",
      "payloadType":5,
      "payloadUuid":"1234567890abcdef1234567890abcdef",
      "interval":1000,
      "followIdr":false
      }
      `
      The currently supported fields and their meanings are as follows:
      payloadContent: Required. The payload content of the passthrough SEI, which cannot be empty.
      payloadType: Required. The type of the SEI message, with a value range of 5 or an integer within the range of [100, 254] (excluding 244, which is an internally defined timestamp SEI).
      payloadUuid: Required when payloadType is 5, and ignored in other cases. The value must be a 32-digit hexadecimal number.
      interval: Optional, default is 1000. The sending interval of the SEI, in milliseconds.
      followIdr: Optional, default is false. When this value is true, the SEI will be ensured to be carried when sending a key frame, otherwise it is not guaranteed.
      videoWidth
      Field description: specify the target resolution (width) of On-Cloud MixTranscoding
      Recommended value: 360 px. If you only mix audio streams, please set both width and height to 0; otherwise, there will be a black background in the live stream after mixtranscoding.

      TRTCPublishCDNParam

      TRTCPublishCDNParam

      Push parameters required to be set when publishing audio/video streams to non-Tencent Cloud CDN

      TRTC's backend service supports publishing audio/video streams to third-party live CDN service providers through the standard RTMP protocol.
      If you use the Tencent Cloud CSS CDN service, you don't need to care about this parameter; instead, just use the startPublish API.
      EnumType
      DESC
      appId
      Field description: appId of Tencent Cloud CSS
      Recommended value: please click Application Management > Application Information in the TRTC console and get the appId in Relayed Live Streaming Info .
      bizId
      Field description: bizId of Tencent Cloud CSS
      Recommended value: please click Application Management > Application Information in the TRTC console and get the bizId in Relayed Live Streaming Info .
      streamId
      Field description: specify the push address (in RTMP format) of this audio/video stream at the third-party live streaming service provider
      Recommended value: default value: null,that is, the audio/video streams in the room will be pushed to the target service provider of the caller of this API.
      url
      Field description: specify the push address (in RTMP format) of this audio/video stream at the third-party live streaming service provider
      Recommended value: the push URL rules vary greatly by service provider. Please enter a valid push URL according to the requirements of the target service provider. TRTC's backend server will push audio/video streams in the standard format to the third-party service provider according to the URL you enter.
      Note
      the push URL must be in RTMP format and meet the specifications of your target live streaming service provider; otherwise, the target service provider will reject the push requests from TRTC's backend service.

      TRTCAudioRecordingParams

      TRTCAudioRecordingParams

      Local audio file recording parameters

      This parameter is used to specify the recording parameters in the audio recording API startAudioRecording.
      EnumType
      DESC
      filePath
      Field description: storage path of the audio recording file, which is required.
      Note
      this path must be accurate to the file name and extension. The extension determines the format of the audio recording file. Currently, supported formats include PCM, WAV, and AAC.
      For example, if you specify the path as mypath/record/audio.aac , it means that you want the SDK to generate an audio recording file in AAC format.Please specify a valid path with read/write permissions; otherwise, the audio recording file cannot be generated.
      maxDurationPerFile
      Field description: maxDurationPerFile is the max duration of each recorded file segments, in milliseconds, with a minimum value of 10000. The default value is 0, indicating no segmentation.
      recordingContent
      Field description: Audio recording content type.
      Note: Record all local and remote audio by default.

      TRTCLocalRecordingParams

      TRTCLocalRecordingParams

      Local media file recording parameters

      This parameter is used to specify the recording parameters in the local media file recording API startLocalRecording.
      The startLocalRecording API is an enhanced version of the startAudioRecording API. The former can record video files, while the latter can only record audio files.
      EnumType
      DESC
      filePath
      Field description: address of the recording file, which is required. Please ensure that the path is valid with read/write permissions; otherwise, the recording file cannot be generated.
      Note
      this path must be accurate to the file name and extension. The extension determines the format of the recording file. Currently, only the MP4 format is supported.
      For example, if you specify the path as mypath/record/test.mp4 , it means that you want the SDK to generate a local video file in MP4 format.
      Please specify a valid path with read/write permissions; otherwise, the recording file cannot be generated.
      interval
      Field description: interval is the update frequency of the recording information in milliseconds. Value range: 1000–10000. Default value: -1, indicating not to call back
      maxDurationPerFile
      Field description: maxDurationPerFile is the max duration of each recorded file segments, in milliseconds, with a minimum value of 10000. The default value is 0, indicating no segmentation.
      recordType
      Field description: media recording type, which is TRTCRecordTypeBoth by default, indicating to record both audio and video.

      TRTCSwitchRoomConfig

      TRTCSwitchRoomConfig

      Room switch parameter

      This parameter is used for the room switch API switchRoom, which can quickly switch a user from one room to another.
      EnumType
      DESC
      privateMapKey
      Field description: permission credential used for permission control, which is optional. If you want only users with the specified userId values to enter a room, you need to use privateMapKey to restrict the permission.
      Recommended value: we recommend you use this parameter only if you have high security requirements. For more information, please see Enabling Advanced Permission Control.
      roomId
      Field description: numeric room ID, which is optional. Users in the same room can see one another and make audio/video calls.
      Recommended value: value range: 1–4294967294.
      Note
      either roomId or strRoomId must be entered. If both are entered, roomId will be used.
      strRoomId
      Field description: string-type room ID, which is optional. Users in the same room can see one another and make audio/video calls.
      Note
      either roomId or strRoomId must be entered. If both are entered, roomId will be used.
      userSig
      Field description: user signature, which is optional. It is the authentication signature corresponding to the current userId and acts as the login password.
      If you don't specify the newly calculated userSig during room switch, the SDK will continue to use the userSig you specified during room entry (enterRoom).
      This requires you to ensure that the old userSig is still within the validity period allowed by the signature at the moment of room switch; otherwise, room switch will fail.
      Recommended value: for the calculation method, please see UserSig.

      TRTCAudioFrameDelegateFormat

      TRTCAudioFrameDelegateFormat

      Format parameter of custom audio callback

      This parameter is used to set the relevant format (including sample rate and number of channels) of the audio data called back by the SDK in the APIs related to custom audio callback.
      EnumType
      DESC
      channel
      Field description: number of sound channels
      Recommended value: default value: 1, which means mono channel. Valid values: 1: mono channel; 2: dual channel.
      mode
      Field description: audio callback data operation mode
      Recommended value: TRTCAudioFrameOperationModeReadOnly, get audio data from callback only. The modes that can be set are TRTCAudioFrameOperationModeReadOnly, TRTCAudioFrameOperationModeReadWrite.
      sampleRate
      Field description: sample rate
      Recommended value: default value: 48000 Hz. Valid values: 16000, 32000, 44100, 48000.
      samplesPerCall
      Field description: number of sample points
      Recommended value: the value must be an integer multiple of sampleRate/100.

      TRTCImageBuffer

      TRTCImageBuffer

      Structure for storing window thumbnails and icons.

      EnumType
      DESC
      buffer
      image content in BGRA format
      height
      image height
      length
      buffer size
      width
      image width

      TRTCUser

      TRTCUser

      The users whose streams to publish

      You can use this parameter together with the publishing destination parameter TRTCPublishTarget and On-Cloud MixTranscoding parameter TRTCStreamMixingConfig to transcode the streams you specify and publish the mixed stream to the destination you specify.
      EnumType
      DESC
      intRoomId
      Description: Numeric room ID. The room ID must be of the same type as that in TRTCParams.
      Value: Value range: 1-4294967294
      Note: You cannot use both intRoomId and strRoomId . If you specify strRoomId , you need to set intRoomId to 0 . If you set both, only intRoomId will be used.
      strRoomId
      Description: String-type room ID. The room ID must be of the same type as that in TRTCParams.
      Note: You cannot use both intRoomId and strRoomId . If you specify roomId , you need to leave strRoomId empty. If you set both, only intRoomId will be used.
      Value: 64 bytes or shorter; supports the following character set (89 characters):
      Uppercase and lowercase letters (a-z and A-Z)
      Numbers (0-9)
      Space, "!", "#", "$", "%", "&", "(", ")", "+", "-", ":", ";", "<", "=", ".", ">", "?", "@", "[", "]", "^", "_", "{", "}", "|", "~", ","
      userId
      /Description: UTF-8-encoded user ID (required)
      Value: For example, if the ID of a user in your account system is "mike", set it to mike .

      TRTCPublishCdnUrl

      TRTCPublishCdnUrl

      The destination URL when you publish to Tencent Cloud or a third-party CDN

      This enum type is used by the publishing destination parameter TRTCPublishTarget of the publishing API startPublishMediaStream.
      EnumType
      DESC
      isInternalLine
      Description: Whether to publish to Tencent Cloud
      Value: The default value is true .
      Note: If the destination URL you set is provided by Tencent Cloud, set this parameter to true , and you will not be charged relaying fees.
      rtmpUrl
      Description: The destination URL (RTMP) when you publish to Tencent Cloud or a third-party CDN.
      Value: The URLs of different CDN providers may vary greatly in format. Please enter a valid URL as required by your service provider. TRTC's backend server will push audio/video streams in the standard format to the URL you provide.
      Note: The URL must be in RTMP format. It must also meet the requirements of your service provider, or your service provider may reject push requests from the TRTC backend.

      TRTCPublishTarget

      TRTCPublishTarget

      The publishing destination

      This enum type is used by the publishing API startPublishMediaStream.
      EnumType
      DESC
      cdnUrlList
      Description: The destination URLs (RTMP) when you publish to Tencent Cloud or third-party CDNs.
      Note: You don’t need to set this parameter if you set the publishing mode to TRTCPublishMixStreamToRoom .
      cdnUrlListSize
      Description: The length of the cdnUrlList array.
      Note: You don’t need to set this parameter if you set the publishing mode to TRTCPublishMixStreamToRoom .
      mixStreamIdentity
      Description: The information of the robot that publishes the transcoded stream to a TRTC room.
      Note: You need to set this parameter only if you set the publishing mode to TRTCPublishMixStreamToRoom .
      Note: After you set this parameter, the stream will be pushed to the room you specify. We recommend you set it to a special user ID to distinguish the robot from the anchor who enters the room via the TRTC SDK.
      Note: Users whose streams are transcoded cannot subscribe to the transcoded stream.
      Note: If you set the subscription mode (@link setDefaultStreamRecvMode}) to manual before room entry, you need to manage the streams to receive by yourself (normally, if you receive the transcoded stream, you need to unsubscribe from the streams that are transcoded).
      Note: If you set the subscription mode (setDefaultStreamRecvMode) to auto before room entry, users whose streams are not transcoded will receive the transcoded stream automatically and will unsubscribe from the users whose streams are transcoded. You call muteRemoteVideoStream and muteRemoteAudio to unsubscribe from the transcoded stream.
      mode
      Description: The publishing mode.
      Value: You can relay streams to a CDN, transcode streams, or publish streams to an RTC room. Select the mode that fits your needs.
      Note
      If you need to use more than one publishing mode, you can call startPublishMediaStream multiple times and set TRTCPublishTarget to a different value each time.You can use one mode each time you call the startPublishMediaStream) API. To modify the configuration, call updatePublishCDNStream.

      TRTCVideoLayout

      TRTCVideoLayout

      The video layout of the transcoded stream

      This enum type is used by the On-Cloud MixTranscoding parameter TRTCStreamMixingConfig of the publishing API startPublishMediaStream.
      You can use this parameter to specify the position, size, layer, and stream type of each video in the transcoded stream.
      EnumType
      DESC
      backgroundColor
      Description: The background color of the mixed stream.
      Value: The value must be a hex number. For example, "0x61B9F1" represents the RGB color value (97,158,241). Default value: 0x000000 (black).
      fillMode
      Description: The rendering mode.
      Value: The rendering mode may be fill (the image may be stretched or cropped) or fit (there may be black bars). Default value: TRTCVideoFillMode_Fill.
      fixedVideoStreamType
      Description: Whether the video is the primary stream (TRTCVideoStreamTypeBig) or substream (e TRTCVideoStreamTypeSub).
      fixedVideoUser
      Description: The users whose streams are transcoded.
      Note
      If you do not specify TRTCUser ( userId , intRoomId , strRoomId ), the TRTC backend will automatically mix the streams of anchors who are sending audio/video in the room according to the video layout you specify.
      placeHolderImage
      Description: The URL of the placeholder image. If a user sends only audio, the image specified by the URL will be mixed during On-Cloud MixTranscoding.
      Value: This parameter is left empty by default, which means no placeholder image will be used.
      Note
      You need to specify the userId parameter in fixedVideoUser .
      The URL can be 512 bytes long at most, and the image must not exceed 2 MB.
      The image can be in PNG, JPG, JPEG, or BMP format. We recommend you use a semitransparent image in PNG format.
      rect
      Description: The coordinates (in pixels) of the video.
      zOrder
      Description: The layer of the video, which must be unique. Value range: 0-15.

      TRTCWatermark

      TRTCWatermark

      The watermark layout

      This enum type is used by the On-Cloud MixTranscoding parameter TRTCStreamMixingConfig of the publishing API startPublishMediaStream.
      EnumType
      DESC
      rect
      Description: The coordinates (in pixels) of the watermark.
      watermarkUrl
      Description: The URL of the watermark image. The image specified by the URL will be mixed during On-Cloud MixTranscoding.
      Note
      The URL can be 512 bytes long at most, and the image must not exceed 2 MB.
      The image can be in PNG, JPG, JPEG, or BMP format. We recommend you use a semitransparent image in PNG format.
      zOrder
      Description: The layer of the watermark, which must be unique. Value range: 0-15.

      TRTCStreamEncoderParam

      TRTCStreamEncoderParam

      The encoding parameters

      Description: This enum type is used by the publishing API startPublishMediaStream.
      Note: This parameter is required if you set the publishing mode to TRTCPublish_MixStream_ToCdn or TRTCPublish_MixStream_ToRoom in TRTCPublishTarget.
      Note: If you use the relay to CDN feature (the publishing mode set to RTCPublish_BigStream_ToCdn or TRTCPublish_SubStream_ToCdn ), to improve the relaying stability and playback compatibility, we also recommend you set this parameter.
      EnumType
      DESC
      audioEncodedChannelNum
      Description: The sound channels of the stream to publish.
      Value: Valid values: 1 (mono channel); 2 (dual-channel). Default: 1.
      audioEncodedCodecType
      Description: The audio codec of the stream to publish.
      Value: Valid values: 0 (LC-AAC); 1 (HE-AAC); 2 (HE-AACv2). Default: 0.
      Note
      The audio sample rates supported by HE-AAC and HE-AACv2 are 48000, 44100, 32000, 24000, and 16000.
      When HE-AACv2 is used, the output stream can only be dual-channel.
      audioEncodedKbps
      Description: The audio bitrate (Kbps) of the stream to publish.
      Value: Value range: [32,192]. Default: 50.
      audioEncodedSampleRate
      Description: The audio sample rate of the stream to publish.
      Value: Valid values: [48000, 44100, 32000, 24000, 16000, 8000]. Default: 48000 (Hz).
      videoEncodedCodecType
      Description: The video codec of the stream to publish.
      Value: Valid values: 0 (H264); 1 (H265). Default: 0.
      videoEncodedFPS
      Description: The frame rate (fps) of the stream to publish.
      Value: Value range: (0,30]. Default: 20.
      videoEncodedGOP
      Description: The keyframe interval (GOP) of the stream to publish.
      Value: Value range: [1,5]. Default: 3 (seconds).
      videoEncodedHeight
      Description: The resolution (height) of the stream to publish.
      Value: Recommended value: 640. If you mix only audio streams, to avoid displaying a black video in the transcoded stream, set both width and height to 0 .
      videoEncodedKbps
      Description: The video bitrate (Kbps) of the stream to publish.
      Value: If you set this parameter to 0 , TRTC will work out a bitrate based on videoWidth and videoHeight . For details, refer to the recommended bitrates for the constants of the resolution enum type (see comment).
      videoEncodedWidth
      Description: The resolution (width) of the stream to publish.
      Value: Recommended value: 368. If you mix only audio streams, to avoid displaying a black video in the transcoded stream, set both width and height to 0 .
      videoSeiParams
      Description: SEI parameters. Default: null
      Note: the parameter is passed in the form of a JSON string. Here is an example to use it:
      {
        "payLoadContent":"xxx",
        "payloadType":5,
        "payloadUuid":"1234567890abcdef1234567890abcdef",
        "interval":1000,
        "followIdr":false
      }
      The currently supported fields and their meanings are as follows:
      payloadContent: Required. The payload content of the passthrough SEI, which cannot be empty.
      payloadType: Required. The type of the SEI message, with a value range of 5 or an integer within the range of [100, 254] (excluding 244, which is an internally defined timestamp SEI).
      payloadUuid: Required when payloadType is 5, and ignored in other cases. The value must be a 32-digit hexadecimal number.
      interval: Optional, default is 1000. The sending interval of the SEI, in milliseconds.
      followIdr: Optional, default is false. When this value is true, the SEI will be ensured to be carried when sending a key frame, otherwise it is not guaranteed.

      TRTCStreamMixingConfig

      TRTCStreamMixingConfig

      The transcoding parameters

      This enum type is used by the publishing API startPublishMediaStream.
      You can use this parameter to specify the video layout and input audio information for On-Cloud MixTranscoding.
      EnumType
      DESC
      audioMixUserList
      Description: The information of each audio stream to mix.
      Value: This parameter is an array. Each TRTCUser element in the array indicates the information of an audio stream.
      Note
      If you do not specify this array, the TRTC backend will automatically mix all streams of the anchors who are sending audio in the room according to the audio encode param TRTCStreamEncoderParam you specify (currently only supports up to 16 audio and video inputs).
      audioMixUserListSize
      Description: The length of the audioMixUserList array.
      backgroundColor
      Description: The background color of the mixed stream.
      Value: The value must be a hex number. For example, "0x61B9F1" represents the RGB color value (97,158,241). Default value: 0x000000 (black).
      backgroundImage
      Description: The URL of the background image of the mixed stream. The image specified by the URL will be mixed during On-Cloud MixTranscoding.
      Value: This parameter is left empty by default, which means no background image will be used.
      Note
      The URL can be 512 bytes long at most, and the image must not exceed 2 MB.
      The image can be in PNG, JPG, JPEG, or BMP format. We recommend you use a semitransparent image in PNG format.
      videoLayoutList
      Description: The position, size, layer, and stream type of each video in On-Cloud MixTranscoding.
      Value: This parameter is an array. Each TRTCVideoLayout element in the array indicates the information of a video in On-Cloud MixTranscoding.
      videoLayoutListSize
      Description: The length of the videoLayoutList array.
      watermarkList
      Description: The position, size, and layer of each watermark image in On-Cloud MixTranscoding.
      Value: This parameter is an array. Each TRTCWatermark element in the array indicates the information of a watermark.
      watermarkListSize
      Description: The length of the watermarkList array.

      TRTCPayloadPrivateEncryptionConfig

      TRTCPayloadPrivateEncryptionConfig

      Media Stream Private Encryption Configuration

      This configuration is used to set the algorithm and key for media stream private encryption.
      EnumType
      DESC
      encryptionAlgorithm
      Description: Encryption algorithm, the default is TRTCEncryptionAlgorithmAes128Gcm.
      encryptionKey
      Description: encryption key, string type.
      Value: If the encryption algorithm is TRTCEncryptionAlgorithmAes128Gcm, the key length must be 16 bytes;
      if the encryption algorithm is TRTCEncryptionAlgorithmAes256Gcm, the key length must be 32 bytes.
      encryptionSalt[32]
      Description: Salt, initialization vector for encryption.
      Value: It is necessary to ensure that the array filled in this parameter is not empty, not all 0 and the data length is 32 bytes.

      TRTCAudioVolumeEvaluateParams

      TRTCAudioVolumeEvaluateParams

      Volume evaluation and other related parameter settings.

      This setting is used to enable vocal detection and sound spectrum calculation.
      EnumType
      DESC
      enablePitchCalculation
      Description: Whether to enable local vocal frequency calculation.
      enableSpectrumCalculation
      Description: Whether to enable sound spectrum calculation.
      enableVadDetection
      Description: Whether to enable local voice detection.
      Note
      Call before startLocalAudio.
      interval
      Description: Set the trigger interval of the onUserVoiceVolume callback, the unit is milliseconds, the minimum interval is 100ms, if it is less than or equal to 0, the callback will be closed.
      Value: Recommended value: 300, in milliseconds.
      Note
      When the interval is greater than 0, the volume prompt will be enabled by default, no additional setting is required.
      お問い合わせ

      カスタマーサービスをご提供できるため、ぜひお気軽にお問い合わせくださいませ。

      お問い合わせ
      テクニカルサポート

      さらにサポートが必要な場合は、サポートチケットを送信して弊社サポートチームにお問い合わせください。24時間365日のサポートをご提供します。

      チケットを送信
      電話サポート（24 時間365日対応）
      Copyright © 2013-2024 Tencent Cloud. All Rights Reserved.
      個人情報保護方針利用規約クッキーポリシー