Copyright (c) 2021 Tencent. All rights reserved.
Module: V2TXLiveCode @ TXLiteAVSDK
Function: Definitions of error codes and warning codes of Tencent Cloud LVB
ErrorCode
EnumType
EnumType | DESC |
V2 Error codes and warning codes |
V2TXLiveCode
V2TXLiveCode
V2 Error codes and warning codes
Enum | Value | DESC |
V2TXLIVE_OK | 0 | No error. |
V2TXLIVE_ERROR_FAILED | -1 | Unclassified error. |
V2TXLIVE_ERROR_INVALID_PARAMETER | -2 | An invalid parameter was input during the API call. |
V2TXLIVE_ERROR_REFUSED | -3 | The API call was rejected. |
V2TXLIVE_ERROR_NOT_SUPPORTED | -4 | The API is currently not suppoted. |
V2TXLIVE_ERROR_INVALID_LICENSE | -5 | Failed to call the API because the license was invalid. |
V2TXLIVE_ERROR_REQUEST_TIMEOUT | -6 | The server request timed out. |
V2TXLIVE_ERROR_SERVER_PROCESS_FAILED | -7 | The server cannot process the request. |
V2TXLIVE_ERROR_DISCONNECTED | -8 | Disconnect. |
V2TXLIVE_ERROR_NO_AVAILABLE_HEVC_DECODERS | -2304 | could not find available hevc decoder. |
V2TXLIVE_WARNING_NETWORK_BUSY | 1101 | Data upload was jammed because the upstream bandwidth was too low. |
V2TXLIVE_WARNING_VIDEO_BLOCK | 2105 | Blocking occurred during video playback. |
V2TXLIVE_WARNING_CAMERA_START_FAILED | -1301 | Failed to start the camera. |
V2TXLIVE_WARNING_CAMERA_OCCUPIED | -1316 | The camera is being occupied. |
V2TXLIVE_WARNING_CAMERA_NO_PERMISSION | -1314 | The camera is not authorized. This warning usually occurs on mobile devices due to the camera permission is denied by the user. |
V2TXLIVE_WARNING_MICROPHONE_START_FAILED | -1302 | Failed to enable the mic. |
V2TXLIVE_WARNING_MICROPHONE_OCCUPIED | -1319 | The mic is being used. If a call is in progress on the mobile device, the mic cannot be enabled. |
V2TXLIVE_WARNING_MICROPHONE_NO_PERMISSION | -1317 | The mic is not authorized. This warning usually occurs on mobile devices due to the mic permission is denied by the user. |
V2TXLIVE_WARNING_SCREEN_CAPTURE_NOT_SUPPORTED | -1309 | Screen capture is not supported in curent system. |
V2TXLIVE_WARNING_SCREEN_CAPTURE_START_FAILED | -1308 | Failed to enable the screen capture. |
V2TXLIVE_WARNING_SCREEN_CAPTURE_INTERRUPTED | -7001 | Screen capture is interrupted by system. |
V2TXLIVE_WARNING_CURRENT_ENCODE_TYPE_CHANGED | 1104 | The codec changed. The additional field codec_type in onWarning indicates the codec currently in use. 1 indicates H.265, and 0 indicates H.264. This field is not supported on Windows. |
V2TXLIVE_WARNING_CURRENT_DECODE_TYPE_CHANGED | 2008 | The codec changed. The additional field codec_type in onWarning indicates the codec currently in use. 1 indicates H.265, and 0 indicates H.264. This field is not supported on Windows. |
Yes
No
Was this page helpful?